[Instructions].
1. Firmly insert the glass flask into the rubber hole on the top of the motor. When doing so, do not rotate the glass flask in a certain direction. Otherwise, the air tube inside the motor may become twisted, preventing air from being fed into the machine and causing it to malfunction.
2. Inject the essential oil of your choice from the top of the glass flask, making sure that the amount injected at one time does not exceed the maximum essential oil line.
Place the silencer over the glass flask.
Turn the power switch on the side of the motor to turn it on and start diffusing essential oil. By turning the switch, you can adjust the intensity of the fragrance according to the size of the room and your preference.
[Cleaning Instructions]
Remove any essential oil remaining in the glass flask by using up all of it or soaking a tissue to remove it, and then pour anhydrous ethanol into the flask to about 1 cm from the bottom. Turn on the power and let it run for 2 to 3 minutes. Remove any essential oil adhering to the inside of the glass flask by gently shaking the entire motor body. Due to the nature of anhydrous ethanol, continuous operation for an extended period of time may cause the glass flask to cool and the glass surface to freeze, so please limit the cleaning operation to a very short period of time. Cleaning is complete when the ethanol in the glass flask is removed by soaking a tissue or the like in the ethanol. If the stains are too severe and cannot be removed, try shaking the flask with anhydrous ethanol or boiling the flask.
Avoid pouring water. If essential oils or anhydrous ethanol mix with water, the flask may become cloudy or water may remain in the flask without volatilizing.
Please purchase anhydrous ethanol separately at a pharmacy.
For details, please refer to the instruction manual that comes with the product.
Click here for the instruction manual(PDF)